VACUUM BOTTLE CARE & USE
Thank you for purchasing a Stanley® thermos bottle!
Below you’ll find information on how to get the most from your new Stanley
vacuum bottle.
For Best Results
Preheat or precool your vacuum bottle by filling it with hot tap water or cold
water.
Let stand for five minutes.
Empty bottle and immediately fill with your favorite hot or cold beverage.
Care & Use of Your New Stanley thermos
To clean your vacuum bottle, wash with warm water and mild detergent. Let stand
for five minutes. Pour out and rinse clean with warm water. Wash with mild
detergent with a soft, damp cloth or sponge and rub dry. If interior becomes
stained, use a mixture of two teaspoons baking soda and warm water. Let stand
open for one hour before rinsing thoroughly.
To remove stubborn stains leave filled overnight with solution of warm water
and baking soda with lid/stopper loosely secure for ventilation. Soaking
overnight produces excellent results.
Do not use bleach or cleansers containing chlorine to clean.
To pour turn stopper one full turn to indicated arrows assuring stopper does
not come off when pouring.
CAUTION
DO NOT PLACE IN DISHWASHER
Wash all parts in warm soapy water and then rinse clean before using.
Don’t put your vacuum bottle in the microwave!
Don’t overfill your vacuum bottle with hot drinks. It could spill and scald
you.
When filled with hot liquid keep out of reach of children.
To prevent spills, make sure your lid and stopper are screwed on completely
before use.
Do not use with carbonated or fermenting beverages or foods.
Do not use for baby or children’s food containing dairy products.
Guarantee
This Stanley vacuum bottle is warranted to be free from any defect in
workmanship or materials and to be thermally efficient provided the vacuum
bottle is used according to the instructions. This warranty does not cover
component parts or malfunction due to alteration, misuse, or accident. Under
the terms of the warranty, your defective vacuum bottle will be replaced within
sixty (60) days after its receipt.
The vacuum bottle should be accompanied by a written notification of the defect
and the original sales receipt.
If you have any questions regarding this or any other Stanley product, please
call our customer service department nearest you.
North America: 1-800-251-4535
Europe: 44 (0) 1 639 730960 / 730997
Australia: 1800 257 134
Asia: 86-21-50366350
Stanley is a registered trademark of:
Stanley, a brand of PMI
www.stanley-pmi.com